Stemsession

Stemsession user guide

From your first song to band rehearsal. Learn to create stems, mute instruments, practise chords and use live audio input.

Your first practice session

Stemsession turns a song into a backing track for playing, learning and singing. Stems are separate tracks: vocals, drums, bass and other instruments. Listen to them together or choose exactly what you want to hear.

  1. Sign in and open Library. Add your own audio file or a YouTube video link.
  2. Wait for the first processed sections, start playback and mute the instrument you want to play yourself.
  3. Adjust the tempo and key. Turn a difficult passage into a loop and practice it a few times.

Signing in, your account and password

  1. Choose Sign in. Use Google or register with an email and password. Your password needs at least 8 characters and must meet the requirements shown during registration.
  2. For email registration, verify your address using the email link. Check spam too. If needed, resend the message and refresh verification in the app.
  3. Click the user icon to open Account. This is where you manage appearance, text size, sign-in methods and access Payments and credits.

Google and a password on the same account

An account created through Google may initially have no password. You can add one under Email and password. You can also link Google to a password account. Once linked successfully, both methods open the same library.

If a password is already set, use the change/reset option to receive an email link. Security changes may require you to confirm your identity again through Google.

Appearance, text size and language

  • Appearance: open Account → App appearance. Choose Monochrome, Purple accent or Deep Blue. Interface colors update automatically.
  • Text size: use the Account slider from 80% to 140%. 100% is the standard size. Choose a setting that makes chords and instructions comfortable to read.
  • Language: use the PL / EN selector in the header or app menu. You can switch languages while reading this guide too.

Add a file or a song from YouTube

  1. Open Library and choose your source: a local file or YouTube.
  2. For a file: choose a recording from your device or drag it into the upload area. Supported formats include MP3, WAV, M4A and FLAC; the file-size limit is 50 MB.
  3. For YouTube: paste a link to an individual video and start the import. Some videos may be unavailable for download; in that case, use a local file.
  4. If your session offers a save option, enable saving to your library or save the completed song later. Wait for saving to finish before ending the session.

Separation can be progressive: the first sections arrive earlier while the rest is processed in the background. The entire song needs to be ready for features such as full export and lyric generation.

Your library

  1. Click Library. Expand the song list or type part of a name into search.
  2. Select a title to load the saved song and its stems. Listening to a saved result again does not start a new separation.
  3. Choose Rename next to a song, enter a title and select Save. This changes the library name while keeping the media and related results available.
  4. To remove an entry, choose Delete and confirm Remove from library. You can cancel before confirming.

Tempo, key and stems

  • Playback: start or pause the song. Click the waveform to move to a different position.
  • Key: shift the song by semitones to suit your voice or instrument. Displayed chords follow the transposition.
  • Tempo: slow down a difficult passage or speed up your practice. Tempo control lets you work on rhythm without manually changing the key.
  • Stems: mute vocals for karaoke, bass to practice the bass part, drums to play along on your kit, or other instruments to add your own part.
  • Solo lets you focus on a selected track. Track sliders set the balance, while backing-track volume controls the whole song mix.

Waveform zoom and looping

Zoom into a passage

The range control below the waveform sets the start and end of the visible section. Bring the boundaries closer together to zoom into a passage. Move them back to the beginning and end to see the whole song. This changes the view, not the recording length.

Select a loop

  1. Hold the pointer or your finger on the waveform for about half a second. Then drag to the end of the passage you want to repeat.
  2. Release to confirm the selection. During playback, the song returns to the beginning of that range.
  3. Adjust the range by dragging its left or right handle. Use this to set the beginning and end of a phrase precisely.
  4. Disable loop turns repetition off. The × button next to the selection removes the range itself.

Chords and how to play them

  • Hover over a chord with your mouse to see a quick fingering preview.
  • Click a chord to open the fingering panel with the current and next chord. On a phone, tap it.
  • Use the Guitar / Piano switch by the diagrams. Guitar shows fretboard fingerings; Piano shows notes on the keyboard. Use the arrows to browse available variations.
  • On a guitar diagram, × means a muted string, ○ means an open string, and numbers 1–4 indicate fingers.

Songbook: lyrics and chords

  1. Once the stems are ready, open Lyrics + chords and choose Generate AI lyrics. Analysis may take a few minutes; progress is shown in the panel.
  2. Read the detected words with chords above them. Playback follow keeps the view with the music; clicking a word seeks to its position.
  3. Choose Edit lyrics and chords. Click text to correct the words, or a chord to change its symbol. You can add and remove chords and move them to the appropriate word or time.
  4. Save your corrections, then check them during playback. Before a performance, download either lyrics alone or Lyrics + chords as TXT.

Export audio and your songbook

Open Export once all stems are ready. Choose the content and format, select Prepare export, then download the resulting file or files. Export uses the settings from the moment you start it.

  • Current mix: includes track levels, mutes, Solo, key and backing-track volume. Use it to make your own practice backing track.
  • All stems - ZIP: one archive containing four tracks. All stems - separately: four downloadable files. You can also select an individual stem.
  • Stem export uses the selected key and each track’s full level. Mixer mutes and Solo apply to current-mix export.
  • MP3 gives you a smaller file for listening and sharing. WAV is larger and suitable for further audio work without another lossy encoding step.

Lyrics, with or without chords

In Lyrics + chords, open the download menu and choose Lyrics .txt or Lyrics + chords .txt. Open the file in a text editor, print it or take it to rehearsal. Review and save your corrections first.

Connect an instrument and play live

  1. Connect your instrument or microphone to an audio interface, then connect the interface to your computer. Plug headphones into the output you want to use for both the backing track and your instrument.
  2. Open Play in the app menu. Choose Guitar, Piano or Vocals and select the correct Interface / microphone.
  3. Choose input channel 1, 2 or 1 + 2. If your instrument is plugged into the second interface input, select 2. A mono device may only offer one channel.
  4. Click Enable input and allow microphone access in the browser. Play a few notes and check the input meter.
  5. Adjust your tone and monitor volume, start the backing track and mute the instrument whose part you are taking over.

You can close the Play live window and return to the song: monitoring continues. A green dot by the button or menu indicates an active input. To stop, reopen the panel and choose Disable input.

Amp, effects and signal order

  • Input EQ runs before the effects. Expand it to reduce excess low frequencies and adjust Tight before distortion.
  • Clean Combo amp: adjust gain, bass, mids, treble, Presence and amp level. The 1×12 cabinet can be switched separately.
  • Drive: enable it if you want distortion, then choose Overdrive, Crunch or Distortion. Adjust its amount, tone and level.
  • Delay controls echo time, feedback and echo level. Reverb adds room ambience.
  • The On / Bypass control enables or bypasses each individual effect. Compare sounds without turning the input off.

Arrange your own chain

Grab a module name or handle in the arrow row and drag it before or after another effect. This changes the actual audio signal order. You can also focus a module and use the keyboard arrow keys. Input EQ stays before this chain, and monitoring stays at the end.

In Guitar mode, enable the tuner in the amp module. Enable input and play one string at a time. The tuner panel hides when disabled. In Piano and Vocals modes, you can reveal all effects if you need the amp or Drive.

DSP buffer and responsive monitoring

In the live panel, expand Monitoring and latency settings. The DSP buffer sets the block size processed by the browser. Smaller blocks can reduce latency; larger blocks give processing more headroom.

  • 64 samples: start here for responsive monitoring. If you hear crackles or dropouts, increase the buffer.
  • 128 samples: a balanced option. 256 samples: more CPU headroom, with potentially greater latency.
  • The browser may use a different block size. Check the Active DSP block message. This selection does not change your interface driver’s buffer.
  • Changing the buffer while input is active can briefly interrupt monitoring. Select an output in the panel if your browser supports it; otherwise, choose it in system settings.

When you need lower latency

Playing mode disables Delay, Reverb and Oversampling while keeping your amp and tone settings. Optional 2× amp oversampling adds processing work and may increase latency; compare monitoring with it on and off.

Test without effects switches to the dry signal with input and monitor level controls, bypassing EQ and the entire effects chain. If delay remains, also check the interface, its driver and system output. Return to effects restores the normal chain.

Input gain and monitor output

The two sliders sit together at the bottom of the panel, but work at different points in the signal chain. Input level → Input EQ → your effect order → Monitor volume → peak protection → output.

  • Input level / Input gain adjusts the digital signal before EQ and effects. 100% leaves the level unchanged; lower settings reduce it, while higher settings drive effects such as Drive and the amp harder.
  • The input meter shows the signal after this slider. CLIP also checks the raw input: if it lights up, reduce the hardware gain on your interface.
  • Monitor volume / Monitor output sets your instrument’s final level after the effects. Use it to hear yourself louder or softer without changing how hard you drive the distortion.
  • LIMIT indicates that monitoring is approaching peak protection. Reduce monitor volume or levels in the chain. Adjust the song itself separately in the player.

Credits and subscriptions

Try it first

After signing in, you get 2 free generations for songs up to 5 minutes and 7 days of full features, starting with your first analysis. Using both generations does not shorten those 7 days. The trial needs no card and does not automatically become a paid subscription.

How generations use credits

One credit covers a song up to 5 minutes. The current mode does not accept longer songs; prepare a shorter excerpt before uploading.

A credit is used for stem generation. Listening to a saved song, changing tempo or key, editing lyrics and exporting do not start another separation. Adding a file again as a new job may use another credit. Premium features require a valid trial or paid access.

Monthly plans

Subscription plans
PackageCredits
Starter10
Pro40
Studio100

Subscriptions renew monthly after confirmed payment. Subscription credits belong to the paid period and expire with it; unused credits do not roll into the next month. Pro and Studio receive priority in the generation queue.

Extra credits

Top-up packs
PackageCredits
Mini5
Plus15
Max40

Buy a top-up in Payments and credits while your subscription is active. Subscription credits are used first, then remaining free credits, then purchased credits. Unused free credits remain available with an active subscription and do not renew. Purchased credits stay on your account, but you need an active subscription to use them. A top-up does not replace or extend a subscription.

View pricing

Buy, change or cancel a plan

  1. Open Account → Payments and credits or Pricing. Select a plan, review the amount and currency, and confirm monthly renewal consent.
  2. Continue to Stripe and complete payment. On return, wait for provider confirmation: access and credits are granted after that confirmation.
  3. To change an active plan, choose another one in Payments and credits and confirm the new charge. The change starts next period, with no extra charge for the current month. Check Plan from next period.
  4. To stop the subscription, choose Cancel renewal and confirm. Access remains until the Paid access until date; the next automatic renewal is disabled.

After the paid period ends, full features require another subscription. Download anything you need for a performance beforehand. If payment or renewal has a problem, check the message and history before buying again.

Payment history

Payments and credits contains Payment history: the date, product, amount and currency, transaction ID and status. Check it for plan purchases, renewals and top-ups.

  • Pending / Confirming: payment is still being checked. Returning from the provider page alone does not confirm a purchase.
  • Paid: the provider has confirmed payment. Check your access period and credit balance.
  • Failed / Expired: the purchase did not complete successfully. Read the message before trying again.
  • Needs reconciliation: the status has not been resolved yet. Refresh data and check again instead of paying a second time immediately.
  • Refunded: a payment refund has been recorded. Refunds can affect your balance or access and are separate from cancelling renewal.

Credit history

Credit history shows the date, source and balance change. It distinguishes free credits, subscription credits and top-ups. It records credit activity, not card charges.

  • A positive value means credits were granted or returned to that source. A negative value indicates a reservation or use.
  • When generation starts, the app reserves the required credits. On success, it confirms their use. A 0 entry can mark settlement of an already reserved credit without another deduction.
  • A failure or cancellation of an unfinished job releases the reservation. Returned credits go back to their source; monthly credits still follow their original period’s expiry.
  • Listening to or deleting a completed result does not undo a finished generation. Compare currently available credits with the summary at the top of the page.